Vlookup quái đản

  • Thread starter netoholic123
  • Ngày gửi
N

netoholic123

Guest
24/6/06
10
0
0
Cần Thơ
Nhờ kiểm tra hàm Vlookup

Chào các bạn,

Tôi có 1 file Excel mà tôi muốn điên đầu với nó. Vấn đề rất đơn giản: gán cho 1 chuỗi ký tự bằng một ký tự, ví dụ, gán cho DNTN Hòa Đại code là H1. Sau đó dùng hàm VLookup tìm kiếm để khi mình gõ H1 thì nó ra DNTN Hòa Đại.

ĐƠn giản vậy nhưng các bạn vui lòng xem file đính kèm (vlookup quai dan.rar), khi tôi gõ N1 nó cũng ra Hòa Đại mà gõ H1 hay H2 nó cũng ra Hòa Đại. Tui muốn điên với nó luôn vậy. Vấn đề tui nghĩ rất đơn giản nhưng khi làm thì tui bótay.com.

Bạn nào phát hiện được lỗi, tui xin ngàn lần biết ơn.

Mến.
 

Đính kèm

  • Vlookup_quai_dan.zip
    4.3 KB · Lượt xem: 177
Sửa lần cuối bởi điều hành viên:
Khóa học Quản trị dòng tiền
A

anhthuan

Sơ cấp
8/6/05
45
0
6
43
Hai Phong
Bạn sửa lại công thức như thế này: =VLOOKUP($A5,'khach hang'!$B$4:$I$43,2,0)

Chúc thành công
 
N

netoholic123

Guest
24/6/06
10
0
0
Cần Thơ
OK, được rùi. Nhờ bạn chỉ, mình đã làm được rùi.

Mình cũng mới phát hiện máy của mình bị virus khá nặng nên công thức Excel nhảy lung tung. Tuy nhiên trong trường hợp này thì mình làm công thức sai.

Một lần nữa, chân thành cám ơn bạn.
 
hieu1563

hieu1563

Guest
netoholic123 nói:
Chào các bạn,

Tôi có 1 file Excel mà tôi muốn điên đầu với nó. Vấn đề rất đơn giản: gán cho 1 chuỗi ký tự bằng một ký tự, ví dụ, gán cho DNTN Hòa Đại code là H1. Sau đó dùng hàm VLookup tìm kiếm để khi mình gõ H1 thì nó ra DNTN Hòa Đại.

ĐƠn giản vậy nhưng các bạn vui lòng xem file đính kèm (vlookup quai dan.rar), khi tôi gõ N1 nó cũng ra Hòa Đại mà gõ H1 hay H2 nó cũng ra Hòa Đại. Tui muốn điên với nó luôn vậy. Vấn đề tui nghĩ rất đơn giản nhưng khi làm thì tui bótay.com.

Bạn nào phát hiện được lỗi, tui xin ngàn lần biết ơn.

Mến.


VLOOKUP(lookup_value,table_array,col_index_num,range_lookup)

Lookup_value is the value to be found in the first column of the array. Lookup_value can be a value, a reference, or a text string.

Table_array is the table of information in which data is looked up. Use a reference to a range or a range name, such as Database or List.

If range_lookup is TRUE, the values in the first column of table_array must be placed in ascending order: ..., -2, -1, 0, 1, 2, ..., A-Z, FALSE, TRUE; otherwise VLOOKUP may not give the correct value. If range_lookup is FALSE, table_array does not need to be sorted.

You can put the values in ascending order by choosing the Sort command from the Data menu and selecting Ascending.

The values in the first column of table_array can be text, numbers, or logical values.

Uppercase and lowercase text are equivalent.

Col_index_num is the column number in table_array from which the matching value must be returned. A col_index_num of 1 returns the value in the first column in table_array; a col_index_num of 2 returns the value in the second column in table_array, and so on. If col_index_num is less than 1, VLOOKUP returns the [HASHTAG]#VALUE[/HASHTAG]! error value; if col_index_num is greater than the number of columns in table_array, VLOOKUP returns the [HASHTAG]#REF[/HASHTAG]! error value.

Range_lookup is a logical value that specifies whether you want VLOOKUP to find an exact match or an approximate match. If TRUE or omitted, an approximate match is returned. In other words, if an exact match is not found, the next largest value that is less than lookup_value is returned. If FALSE, VLOOKUP will find an exact match. If one is not found, the error value #N/A is returned.

Remarks

If VLOOKUP can't find lookup_value, and range_lookup is TRUE, it uses the largest value that is less than or equal to lookup_value.
If lookup_value is smaller than the smallest value in the first column of table_array, VLOOKUP returns the #N/A error value.
If VLOOKUP can't find lookup_value, and range_lookup is FALSE, VLOOKUP returns the #N/A value.

Bạn thiết lập hàm Vlookup mà không để ý đến thông số range_lookup
Hãy tìm hiểu kỹ về Vlookup bạn nhé
Thân!
 

Xem nhiều

Webketoan Zalo OA